This product is sold by COMPART, a NUVIATech Protection brand.
EasyPART is a two-component intumescent fire-stop foam for sealing electrical bushings and ducts
Configuration : In floor or wall
Materials : Drywall, masonry, concrete
Type of protection : Fire
Protection for : Piping and electrical network
DESCRIPTION
EasyPART is a two-component intumescent fire-stop foam, grey in colour.
Available in 3 sizes: Approximately 2.6L, 5L or 12L of expanded foam.
Sealing of small to large openings: up to 1200mmx800mm
BENEFITS
• Very high rate of expansion (x12 approx.)
• Easy to use: ready-to-use product with applicator gun
• Fast setting time
• Fittings easily fed through without changing the existing sealing
SPECIFICATIONS
• Density: 0.08kg/L approx
• Thermal conductivity (according to ISO 8302): 0.04W (m.K)
• Use within: 12 months maximum (see marking on the cartridge)
• Reaction-to-fire classification: E
• Packaging: 210ml, 400ml or 900ml
* EI: Integrity and Insulation: stops hot gas and smoke (E), and provides thermal insulation (I)
APPROVALS AND CERTIFICATIONS
• ETA-15/0432 of 12/09/2015
• EFECTIS report 13-A-492 Rev1
• Tested according to European standard EN 1366
IMPLEMENTATION
• Calculate the volume of the opening to be filled and the number of cartridges required
• Clean and degrease the supports
• If necessary, make a light formwork (cardboard, polyane, etc.)
• Remove the cap and screw on the static mixer
• Using a suitable gun, extract the foam to fill the opening completely
• Allow to dry for 15min before removing the formwork, then apply the compliance label