Intumescent fire wall foam EasyPART

• Very high expansion rate (x12 approx.)
• Easy to use ready-to-use product with applicator gun
• Fast setting time
• Easy positioning of through-holes without modifying the existing caulking

• EI 120: Fire resistance
• x12: Expansion rate
• 0: Guaranteed halogenated derivative-free

EasyPART is a two-component grey intumescent fireproof foam.
Available in capacities: 2.6L, 5L or 12L of expanded foam.
Packaging: 210ml, 400ml or 900ml.
Sealing of small to large openings: up to 1,200mmx800mm
Configuration in slabs or walls, on all supports: drywall, masonry, concrete, etc.

• Calculate the volume of the opening to be filled and the number of cartridges required
• Clean and degrease the surfaces
• If necessary, make a light formwork (cardboard, polyane, etc.)
• Unscrew the cap and screw the applicator (static mixer)
• Using a suitable gun, extract the foam to fill the opening completely
• Allow to dry for 15 minutes before removing the formwork, then place the compliance label

• Density: 0.08kg/L approximately
• Thermal conductivity (according to ISO 8302): 0.04W (m.K)
• Shelf life: 12 months maximum (see marking on the cartridge)
• Reaction-to-fire classification: E

• Refer to the product safety data sheet
• Personal safety hygiene in the workplace
• Wear suitable PPE: gloves and protective goggles

• ETA-15/0432 of 12/09/2015
• EFECTIS report 13-A-492 Rev1
• Tested according to European standard EN 1366-3