Nuvia
Cancel

Fireproof cable entry box EI120 EvoluPART

  • Quick and easy installation with mechanical fixings
  • Allows the evolution of electrical installations by the passage of new penetrations, without modification of the existing firewall
  • Can be dismantled and reused as needed
  • No need to re-caulk
  • Available in three sizes to fit all openings
  • EI 120: Fire resistance
  • Enables the upgrading of electrical installations
  • Removable and reusable
  • 1mm thick metal enclosure, lined with intumescent materials
  • Enables easy re-entry, for new cables
  • Fire Resistance: EI 120
  • Position the enclosure on the wall and mark the fixing points
  • Drill with an 8mm drill bit to a depth greater than 45mm
  • Remove dust from the brackets
  • Install the lower part of the enclosure under the cable tray using the dowels
  • Attach the lower part to the cable tray using the plastic clamps
  • Position the upper part of the enclosure using the toggle fasteners
  • Tighten the fixing points using the dowels
  • Safety hygiene rules in the workplace
  • Wear suitable PPE: gloves and protective goggles
  • EFECTIS report 13-A-492 Rev1
  • Tested according to European standard EN 1366-3
Description

EvoluPART is a fireproof cable entry box for sealing electrical cable passages.
Consisting of a metal box lined with intumescent materials, EvoluPART can be used in a concrete slab or wall configuration and provides 2-hour fire-protection according to standard EN 1366-3.

This product belongs to the Compart range of protective products for the conventional sector
Interested in this product ? Get in touch with a sales rep.
  • Quick and easy installation with mechanical fixings
  • Allows the evolution of electrical installations by the passage of new penetrations, without modification of the existing firewall
  • Can be dismantled and reused as needed
  • No need to re-caulk
  • Available in three sizes to fit all openings
  • EI 120: Fire resistance
  • Enables the upgrading of electrical installations
  • Removable and reusable
  • 1mm thick metal enclosure, lined with intumescent materials
  • Enables easy re-entry, for new cables
  • Fire Resistance: EI 120
  • Position the enclosure on the wall and mark the fixing points
  • Drill with an 8mm drill bit to a depth greater than 45mm
  • Remove dust from the brackets
  • Install the lower part of the enclosure under the cable tray using the dowels
  • Attach the lower part to the cable tray using the plastic clamps
  • Position the upper part of the enclosure using the toggle fasteners
  • Tighten the fixing points using the dowels
  • Safety hygiene rules in the workplace
  • Wear suitable PPE: gloves and protective goggles
  • EFECTIS report 13-A-492 Rev1
  • Tested according to European standard EN 1366-3
DOWNLOADABLE DOCUMENTS
Product data sheet
Safe Data Sheet (FR)
Products of the same category : Reagent