- Easy to install.
- Applicable and compatible with all our caulking products.
- Good adhesion on all types of surfaces.
- Resistant to water pressure up to 10 m CE (1 bar) depending on the type of penetration and the type of caulking
- Resistant to water pressure up to 21 m CE (2.1 bar) on caulking without feedthrough
- Resistant to water and aggressive liquids (except hydrocarbons).
- Product type: Two-component silicone elastomer
- Density of finished product (polymerised): approx.1.5
- Three application options:
- by spray gun
- with a spatula
- with a brush
- Setting time: approx. 4 hours
- Complete curing: 24 hours
NuCOAT 3110 is a silicone elastomer used as a surface coating, to protect or repair surfaces with high sealing requirements (water, air), or specific requirements (decontaminable, resistance to aggressive liquids, etc.)
Interested in this product ? Get in touch with a sales rep.- Easy to install.
- Applicable and compatible with all our caulking products.
- Good adhesion on all types of surfaces.
- Resistant to water pressure up to 10 m CE (1 bar) depending on the type of penetration and the type of caulking
- Resistant to water pressure up to 21 m CE (2.1 bar) on caulking without feedthrough
- Resistant to water and aggressive liquids (except hydrocarbons).
- Product type: Two-component silicone elastomer
- Density of finished product (polymerised): approx.1.5
- Three application options:
- by spray gun
- with a spatula
- with a brush
- Setting time: approx. 4 hours
- Complete curing: 24 hours